oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 835-if44.0m-05a 44.0 mhz if saw filter 5.40 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o swr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 835-if44.0m-05a january 2011 rev a 44.0 mhz if saw filter 5.40 mhz bandwidth product specification p. 1 www.oscilent.com source & load impedance: 50 ? mechanical dimensions (mm) test circuit pin description b, c, d, f ground a in e out
oscilent part number 835-if44.0m-05a january 2011 rev a 44.0 mhz if saw filter 5.40 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -30 - 80 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz 43.95 44.0 44.05 insertion loss at fo db - 25.0 26.5 amplitude ripple variation at fo 2.7 mhz db p-p - 0.5 0.8 group delay variation at fo 2.7 mhz nsec - 60 100 absolute delay at fo sec - 4.1 - temperature coefficient ppm/c - -94 - bandwidth at ?1.0 db mhz 5.5 5.70 - bandwidth at ?3.0 db mhz 5.8 5.88 - bandwidth at ?40.0 db mhz - 6.65 6.8 ultimate rejection db 45 50 -
oscilent part number 835-if44.0m-05a january 2011 rev a 44.0 mhz if saw filter 5.40 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?40.0 db wide-band
oscilent part number 835-if44.0m-05a january 2011 rev a 44.0 mhz if saw filter 5.40 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo2.7mhz group delay variation fo2.7mhz smith chart
oscilent part number 835-if44.0m-05a january 2011 rev a 44.0 mhz if saw filter 5.40 mhz bandwidth product specification p. 5 www.oscilent.com swr
|